DIMONDS® P1811 Water-based Blend Polyols for PU Foam Discontinuous Sandwich Panel

Description

DIMONDS^® P1811 is a compounded polyether polyol developed for discontinuous panel. It is water based system and environmentally friendly. It contains polyether polyol, silicone surfactant, catalysts and water. It has good flowability and thermal stability.

Typical Properties

Reaction properties (hand test)

Processing information

It is recommended to utilize high pressure foaming machinery. The chemicals should be adjusted to the correct temperature between 22-27℃ to ensure reactivity and viscosity suitable for processing. The mixing pressure has to be set for both components at 120-150 bar. The mould temperature recommended is 35-45℃ to guarantee good foam performances.

Foam properties

The above testing data have been generated in lab or field conditions which are typical for this application. They are believed to be correct but data variations due to varying processing or ambient conditions can not be excluded. The customer remains responsible for making his own interpretation of data and suitability of the chemicals to his particular operation.

Handling and Storage

DIMONDS^® P1811 should be protected from moisture by keeping containers sealed when not in use. Drums have to be stored indoors to protect the material from water ingress, frost and direct heat from the sun. Under temperature conditions and in properly sealed containers, the storage life of the polyol is 6 months.

The optimum storage temperature should be 10-30℃.